What preventive measures can we take when a complete set of high and low voltage distribution equipment fails?

電氣成套設備廠家認為，，當高低壓配電成套設備操控的環節，必須選定通過培訓后的電力工作人員，唯有在經過培訓后取得了從業資格證才能進到到崗位當中，電力工作人員在開展操控的過程中，必須嚴謹?shù)匾勒展╇娫O(shè)備的標準規范開展，不能夠依照自身的想法隨便處置人和的操控問題，從而合理有效提高高低壓裝置的運轉性能，電力工作人員對設備的運轉情況就能達到全 方位掌握，促使供電設備迅速地進到到正常的運轉狀態當中。

Electrical equipment manufacturers believe that, first of all, when the operation of high and low voltage power distribution equipment, we must select the power workers who have passed the professional training. Only after the training, they have obtained the qualification certificate can they enter the post. In the process of operation and control, the power workers must strictly carry out in accordance with the standards and specifications of power supply equipment, not in accordance with the self-regulation In order to improve the operation performance of high-voltage and low-voltage devices reasonably and effectively, the power workers can master the operation of the equipment in an all-round way, and promote the power supply equipment to enter the normal operation state quickly.
                          

另一方面，在安裝高低壓配電設備之前，必須嚴謹依照說明開展，在安裝后要開展詳細的檢查，保證 達標后才能交付使用，在運轉前期也要嚴謹設立檢查和監督次數，以保證能及時地發現裝置中是否存在運轉問題。然后，在高低壓配電裝置處于運轉情況時結合監測設備，利用電子監測系統來全 方位監測供電設備的運行情況，并且結合網絡通信技術來提高供電設備的監測效率，實時掌握供電設備的運轉情況，有利于減少設備運轉中發生隱患的頻率。電網系統的功能和性能主要是由高低壓配電設備決定的，唯有及時合理有效的處置好設備運轉中的故障問題，才能提高設備和電網的水準，反映出高低壓配電裝置的重要程度。

On the other hand, before the installation of high and low voltage distribution equipment, it must be carried out strictly according to the instructions. After the installation, it is necessary to carry out detailed inspection to ensure that it can be delivered for use after reaching the standard. In the early stage of operation, it is also necessary to strictly set up the inspection and supervision times to ensure that the operation problems in the device can be found in time. Then, when the high and low voltage power distribution device is in operation, combined with the monitoring equipment, the electronic monitoring system is used to monitor the operation of power supply equipment in an all-round way, and combined with network communication technology to improve the monitoring efficiency of power supply equipment, and master the operation of power supply equipment in real time, which is conducive to reducing the frequency of hidden dangers in equipment operation. The function and performance of the power grid system is mainly determined by the high and low voltage distribution equipment. Only by timely, reasonable and effective disposal of the fault problems in the operation of the equipment, can the level of the equipment and the power grid be improved, reflecting the importance of the high and low voltage distribution equipment.

感謝您的閱讀，希望以上內容對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：電氣成套設備廠家http://m.cnchaoda.com。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: electrical complete equipment manufacturers http://m.cnchaoda.com .